Arrangement of drywall partitions: what to take into account

30.05.2017 | комментариев 0 | раздел: Стены

You can name many materials that are quite successfully suitable for arranging interior partitions. But still, among them, drywall has recently enjoyed especially great demand. This is a fairly durable material, for the manufacture of which gypsum and dense cardboard are used, which is reflected in the name. Both components that consist of drywall have high environmental purity and cannot harm the owners of the apartment. Carry out the installation of partitions using drywall quite easy. Moreover, its use in the process of performing such a procedure is very cheap. And it also does not take too much time. The technology of this process itself can be described quickly and at the same time quite understandable. First you need to build a frame, on which drywall plates will be mounted. The frame is prepared from special profiles that can be made of aluminum or steel. Moreover, in this case, aluminum is more preferable. He has much less weight than he became. But if it is decided to use steel profiles, then at least it should be made of stainless steel. The profiles must be fixed on the floor and on the ceiling, thus creating the basis for drywall. Sheets need to be selected so that the appearance of horizontal seams can be excluded. On the one hand, there will be no problems in fixing the material. On the other hand, the upper gypsum cardboard panels will not come on to the lower. That is, the partition will last as long as possible and in general will remain aesthetically looking, will not create problems when performing the finish. It is best to fix drywall on the frame through the use of self -tapping screws. It is necessary to adjust the sheets to each other, taking into account the fact that only minimum cracks should remain between them. This will greatly simplify the further procedures for finishing the partition. And she, again, will look presentable. Usually the drywall partition is made in three layers. There are sheets themselves along the edges, and a heater or soundproof material is laid between them. Before moving on to the finish of the finished design, the seams available in it should be thrown. To achieve the best effect on the seams, you can also apply installation tape. As a result, the surface will be even and perfect for further work.

Оставить комментарий

Текст сообщения:

Имя:

E-mail:

Капча загружается...