Attach the door box from all sides.

The opening method classifies the door to:- the design that opens;- which rolls out;- which folds;- which rises. What you need for a high -quality door installation you will need an optimistic mood and some tools. Even if you are not a specialist in the installation of door structures, do not worry. This is not a difficult task. Take a hammer, a screwdriver, a chisel, a drill, roulette, a square, level with you. The correct installation of the right to install the door block, it is necessary to strictly observe the sequence of stages of work. First, clean up the opening itself. When the opening is ready, a door frame is installed in it. Next, horizontal placement is made, the threshold is nailed. After there is a vertical installation. The box is attached from above and below, loops are attached. Then the door leaf is hung. The accuracy of the fitting is checked. Check the density of the narthex. Develop a lock. Attach the door box from all sides. Take care of your fittings, beat the platbands. The heads of the nails are shed. A few tips:- Before installing an interior door, leave it indoors. Let the material get used to operating conditions;- if the door is installed in a private house where there are no verandas and corridors, then get two doors. You will install metal from the side of the street, to protect against uninvited guests, wooden from the inside of the interior, to protect against frost;- structures made of deciduous species are better;- coniferous woods- cheaper, are exposed to moisture;- integral wood is subject to temperature changes; — the quality of the coating can be checked in a simple way: press on it with a fingernail. If there are no traces left, this is a good coating;- choose a metal door with filling, not hollow.