Ceramomorite from chambers using moisturizing: what is it

Crama tiles from chambers using moisturizing was throughout the cross -section of the channel of even firing, red, dense, sonorous, including in the legs of the cages, while the brick in chambers without moisture taken for comparison was less dense, did not have sound. and in the cross section of the furnace channel there was an uneven firing. The strength of brick has increased significantly. Thus, the temporary resistance indicators increased from 117.8 to 143.3 kg/cm2, or 22%, respectively increased the indicators of the strength limit during the bend from 28.8 to 40.8 kg/cm2, or by 43%, in this water absorption decreased from 13.1 to 11%. . The transfer of the ring furnace by Ivanovo No. 1 to work with the moisturizing zones of the firing zones achieved the achievement of the qualitative indicators of porcelain tile when using the moisturizing of high temperatures was the basis for the transfer of the Ivanovo ceramic plant No. 3 to the work according to the specified method for a longer period of time. The target installation of the transfer of the ring furnace to work with water in the zone of high temperatures was: firing at high speeds of fire to ensure stable shoots (at least 2000 pieces from 1 m3 of the garden channel). Improving the quality of products and, in particular, in order to raise the brand of brick from 75, systematically produced by the plant up to 100. Elimination of the uneven firing on the section of the garden channel — a weak firing in the upper part of the cross section of the furnace.