Distance between which

21.04.2017 | комментариев 0 | раздел: Стены

Then you need to install 27×28 mm profiles in both bases of the column, cutting them according to the desired dimensions (it is done with scissors for metal) and fixed with self -tapping screws. Next, you need to take the guides 60×27 mm and also cut based on the height of the future structure. To begin with, two profiles are installed in one of the corners of the square or rectangle and fastened with self -tapping screws; The same procedure is repeated in each of the corners. The vertical of their installation must be adjusted using the building level. Then, between them, horizontal jumpers are mounted from the same profile of 60×27 mm, the distance between which is about half a meter. After that, you need to cut drywall according to the required sizes and sheathe the frame, fastening it on screws. Before starting putty drywall, all corners are covered with perforated corners.

Оставить комментарий

Текст сообщения:

Имя:

E-mail:

Капча загружается...