How to equip the perfect floor: materials and technologies

Perfectly, this is a perfectly flat floor, without a single flaw. However, in order to achieve this, you will have to make a lot of effort. Firstly, you need to choose the right materials that are suitable in your case. After that, the so -called stage of “preparation of the draft floor” comes, and only after all this is the “final” coating laid, with strict observance of all the rules and features. It is unfortunate that, without having the necessary set of knowledge, we often make mistakes at one of these stages, and this leads to undesirable consequences. In the best case, these will be mild irregularities and barely noticeable defects, and in the worst — the need to re -cross the floor. Most often, this applies to the repair of warm floors. This is due to the fact that many are not familiar with the rules for its installation. The first point when laying the floor is its alignment (if necessary). There are many methods: from flooding, aligned floors to the grandfather’s method — a simple concrete screed. If the wooden floors are repaired, it is necessary to give time to ensure that the screed or the flood floor will dry out and take the necessary shape. Non -compliance with this simple rule is fraught with sad consequences. When the floor is “settled” — proceed to laying the coating. We should not forget that if you plan to use a warm floor system, then the tree should be selected very carefully. Many varieties of wood are not suitable for flooring underfloor heating. To avoid the destruction of the coating, you should consult professionals.