Humidity in the
The stucco molding from 3 to 5 days completely freezes, depending on its size and humidity in the room.
The box, remove
In order to pull out the finished gypsum product from the mold, it is turned upside down with the box, remove the box, and slowly, starting from the center, remove the product from the matrix.
With a spatula again
When gypsum after some time begins to harden, and you will see this with a naked look - the mirror surface of the gypsum solution will become dull, you will have to work with a spatula again.
After that, the
After that, the gypsum product needs to be reinforced, for which you will need hemp fiber, pacli for plumbing needs, aluminum or copper wire.
Then it is
All gypsum stucco molding, designed for placement on the ceiling or walls of the room, is made in forms of silicone.
Is recommended to use
For the preparation of the solution, Portland cement of brands M300 - M600 is most often used.
And cannot be used
Slag Portland cement hardens for a long time and cannot be used in winter, since it loses strength at low temperatures.
Be clearly observed
To prepare a solution that is needed to pour the foundation, cement, gravel, sand are used.