The cracks and cavities

In relation to the processing of paintwork materials. If you are going to use the paintwork of domestic production, then before applying the coating you will need to carry out the following preparatory work: firstly, it is necessary to degrease the surface of the wood. In the event that the paint or varnish is not applied for the first time, first it is necessary to completely remove the rest of the last time from the last time. If the surface of the wood at one time was not carefully processed and there are cracks and bumps on it, then it is necessary to eliminate them — the cracks and cavities are thrown and the tubercles are removed. After the surface of the wood is put into proper state, you can proceed to the direct painting of the surface. After the end of the painting, the surface must be completely, thoroughly dried.