What is a double shirt: features

Zenzubel, designed for sample and cleaning of quarters. Its piece of iron, which has the shape of a spatula, is inserted into the block from the bottom at an angle of 45-65 ° through a hole that serves simultaneously to remove chips. On the front of the pad there is a small recess on which the thumb of the left hand rests during operation. Fugan — the same plate, but with a longer block (90 cm). It is used to align the surfaces of large wooden elements. The presence of long shavings when Fuganke’s operation indicates that the element is attached. Faltsovka serves to sample quarters. Her piece of iron has a profile with two protrusions. One of them is designed to sample a fold in width, the other — in depth. In construction, you may need high -quality plaster that you can buy here: Plaster. Double rubbing is used when aligning the ends and irregularities after work with a single shirt. It differs from the usual one by the presence of a double piece. One of them is the iron of a single shirt with a slot for attaching a second piece of iron to it, called a humpbacked. Gorbatik cruits chips to eliminate bullying. The stroke serves to select the carpets of carpentry of various profiles. To this end, the blades of iron strokes give a wide variety of curvilinear outlines. Shpuntubel is designed to sample slopes. It consists of two pads interconnected by wooden screws, thanks to which the distance from the edge of the element is adjusted to the chosen Spunt. The carpentry should also include the device of the most modern parquet floors. The constructive signs distinguish a set and shield parquet. The most common is a set of parquet. He is assembled from separate oak or beech rivets. Parquet rivets in the plan have a size of 15-50 cm long with a gradation of 5 cm and a width of 3.5-9 cm with a gradation of 0.5 cm.