What is the design of Klipp: Features

Let’s get back to the design of Klupp. Finally, a very significant drawback is that the complex design of Klupp makes it difficult to disassemble it, and this becomes more difficult to maintain the Klipp in proper purity. During the work of Klipp, the duplex Olifa, and partly small chips are clogged under the planhaba, and if the KLAPP was not cleaned after the end of the worker, the Olifa dries up due to its properties over night, gluing the plankh to the body. The same happens with the dies. They also dry to the grooves, along which they move. For our assignment, worker heating devices and steel radiators bought boat at good prices in the store. Starting the work of the next morning, the worker, if he did not clean after work, he will only hardly move the planhab from his place. At the same time, unfortunately, they often use the means completely unacceptable: they beat the planhabe with a hammer, and sometimes a chisel. This way destroys the planhab and cause irreparable harm to the body, not designed for such blows. Blows are harmfully reflected in the work of the complex mechanism of Klipp Duplex; They can violate the correctness and accuracy of the movement of its dies and directions, t. e. Klipp can be completely spoiled and unsuitable. From all of what was said about Kulapp Duplex, it is necessary to draw the following conclusions: Klipp Duplex requires extremely careful care and mandatory daily very thorough cleaning after work.